Connection of internet through mobile
Connection of internet through mobile
Wireless routers with built-in switches are everywhere. Although there are
differences between the routers, they have largely the same features. This
guide provides a summary of the common aspects of the routers currently on the
market. Reading your router manual is still necessary to know exactly what
features your router has and where they are located, but reading this will give
you an idea of what to expect before diving into the manual.
What is a router?
A router is any device that acts as a gateway between 2 or more separate
networks. In our case, that means that the local network is connected to the Internet,
and vice versa. The router ignores traffic local traffic or traffic it is not
configured to handle, but when Internet access is attempted from within the
local network, it springs into action. With NAT (Network Address Translation),
the router shares the Internet connection to all the computers connected to the
local network. The router keeps track of the originating local computer and
manages the connection with the outside Internet server. If a computer on the
Internet attempts a connection with the router or to a local computer past the
router, the router denies the connection unless the router was specially
configured to allow that connection.
Many routers can treat the wireless LAN (WLAN) as a separate network from
the wired LAN. This is often done because wireless networks are easy to break
into. The idea is that people can keep their wired computers away from the
untrusted wireless network. The router will still share the Internet connection
(WAN) to both the wireless and wired LANs, regardless of this configuration.
WAN connection
WAN stands for Wide Area Network. With a wireless router, it is used for
the Internet connection. All of the WAN settings are the settings for the
Internet-facing side of the router.
Router MAC Address (Clone MAC address)
A MAC address is a hardware identifier that is roughly unique. Many
companies, especially cable ISPs, must store the MAC address of the router or
Internet-facing computer, and they are configured to only allow that MAC
address to connect to their network. If that is the case, your two options are
to notify your ISP of the new MAC address or set the router’s MAC address to
the MAC address of the previously Internet-facing
router/computer.
Routers will show the router’s current MAC address and offer a form to
change the MAC address. Enter the MAC address if needed.
DHCP client
All routers have a DHCP client (also called “Dynamic IP address”). DHCP is
the protocol that automatically configures an IP address, netmask, gateway, and
DNS addresses. The DHCP client gets the router’s IP address and other network
info. Usually, this is just a radio button to select if this is how your ISP
offers connection info. Most cable ISPs use this method.
Static IP
If your ISP provides a static IP, then fill in the IP information they
provided you with when you signed up. This includes the IP address, netmask,
gateway, and DNS addresses. Most T1/T3-type connections and business DSL
services provide static IPs and use this method.
PPPoE
PPPoE stands for Point-to-Point Protocol over Ethernet. PPP is the
technology used for dialup Internet access. PPPoE works similarly except it
works over a network connection. Most DSL ISPs now use PPPoE. You’ll need to
enter your PPPoE username and password. Some ISPs also require a service name
to be entered. Usually, you do not need to enter the IP/DNS addresses. However,
if you have a static IP through PPPoE, then you will need to enter your IP and
DNS addresses your ISP provides.
PPTP
Not every router supports PPTP connections, but many do. PPTP stands for
Point-to-Point Tunneling Protocol. PPTP is used to join 2 networks using the
Internet as an intermediary network. It allows your home computers to connect
to your work network over the Internet. It is also commonly used by xDSL ISPs
in Europe. The key is to enter the PPPTP userID, password, and PPTP Gateway IP
address. The IP addresses, subnet mask, and default gateway may or may not be
required.
DNS
Some routers break the DNS addresses into their own setup. Just enter the
IPs for the DNS servers your ISP provides. There are also many DNS servers that
can be used from any connection. You can search for those DNS servers with
Google.
LAN
The LAN settings are for your Local Area Network. This is the settings
section for the local computers connected to the router. This includes setting
up the local IP for your router and configuring the DHCP server so your
computers can be automatically configured via DHCP, rather than requiring
manual static configuration.
Set router IP
This IP is the IP your local computers see the router as. Generally, you’ll
want to use an IP inside one of the reserved IP address ranges. Router IPs
typically end in .1 or .254. The most common home router IP is 192.168.2.1.
DHCP server
A DHCP server provides automatic configuration to computers that are
connected to it. It assigns an IP address to the computer, and gives it the
network netmask, gateway IP, and DNS IPs. If you choose to disable the DHCP
server, you can configure your computers manually to use the router. That is
generally more complicated, so I generally recommend enabling the DHCP server.
The starting and ending IP addresses determine what the range of IP
addresses will be assigned to the local computers. It is a good idea to give a
larger range than the computers you have. Doing that means you won’t have to
worry about running out of IP addresses.
The lease time determines how long a specific computer will be assigned a
specific IP. This can be as short as a few minutes or as long as months. If you
want to make sure that your computers keep the same IPs for a long time, then
set a long lease time.
